ILHX Series, Fluoropolymer Inline Exchangers

One pass, acid or process fluid heat exchanger for pre-diffusion and photo resist cleaning.

BENEFITS

• Reduce process waste stream cost.
• Significantly cut acid disposal cost by reducing sfandard 10:1 water aspiration.
• Reduce acid cool down time to 10-minutes. Opens bench for service sooner.
• Produces 55°C piping safe waste with no pumps.
• Increase bench throughput.

SPECIFICATIONS

• Service: One pass cooling of acid or process streams.
• Configuration: Vertical.
• Process
  • Inlet Temperature: Up to 130°C.
  • Inlet Pressure: Gravity feed up to 20 psi.
  • Volume: 7 gal.
  • Process Time: 10-minutes.
  • Outlet Temperature: 55°C.

• Cooling Water Inlet
  • Temperature: 15°C.
  • Pressure: 50 psi.
  • Flow: 6.0 GPM.

• Material: Fluoropolymer & PVDF
• Available Connection: Process and cooling lines 3/4-inch Flaretek^® fittings.

• Mounting: Vertical with Halar coated bracket for surface or stainless "U" bolt for panel.

GRAVITY SIMPLE

The Lufran^® ILHX chamber reduces the hours needed to cool hot acid or other process chemistry to a mere 10 minutes, which improves your bench through put. Without adding volumes of aspirating water, you don't add to disposal costs.

Common connections mate the Lufran^® ILHX to a wide variety of systems with operating temperatures up to 130°C.

Flaretek^® is a registered trademark of Fluoroware, Inc.

For more information, prices and availability please visit our contact page.