TIH Series, Fluoropolymer Inline Heaters

Point of use, rapid heat-up of DI water and process chemicals.

The TIH In-Line Series, point of use heater quickly heats up DI water and various process chemicals with a minimum amount of exposed surface area. An ultra clean environment is provided with no metal to fluid contact. Wetted surfaces are of PTFE fluoropolymer (heater and TFE fluoropolymer heating chamber). A process controller which provides accurate and consistent temperature control is also available.

BENEFITS

• Compact and economical (low cost).
• Simple to operate, easily installed.
• Point of use, rapid heat up.
• Heats all types of acids & DI water.
• All fluoropolymer fluid path.
• For semiconductor, laboratory, pilot line, R&D and similar applications.
• No storage tanks to promote bacterial growth (low volumetric hold up).

HEATING CHAMBER:

• Purged, PTFE fluoropolymer sleeved heater (patent #4,553,024 - 4,158,764). Heater is continually swept clean and dry by a small purge of N₂ or CDA. This feature removes detrimental moisture or diffused particulate matter thereby ensuring maximum heater life and clean operation.
• Rugged fluoropolymer heating chamber.
• Heaters are in direct contact with the process liquid for ultra fast heat up and response.
• Operating pressures to 40 PSI.
• Fluoropolymer encapsulated J type thermocouple.
• Temperatures up to 180°C depending on chemistry, concentration, etc.

PROCESS CONTROL MODULE:

• Easy to use pre-wired control module.
• Digital PID based temperature controller.
• All operational switches.
• Membrane style compact temperature control module with integral timer.
• Enclosure Size: 5.5"W x 6.0"H x 19" deep.
• Faceplate: 6"W x 8.25"H.
• Controller enclosure designed to be either panel or shelf mounted.
• Temperature sensor: fluoropolymer sleeved J-type thermocouple.
• Available voltages: 110, 208, 240, or 480 VAC, single phase.
• 3 phase (custom wattages and voltages available upon request).

SAFETY AND DESIGN

• Double containment plumbing connections.
• Reliable performance. Years of proven field use.
• Operator safety improved. Eliminates the need for an "in bath" heater.
• Easy access from service/chase area.
  • Heater is protected through electrical interlocks.
  • Liquid level sensor High process temperature alarm.
  • Internal overtemperature thermocouple.
  • N₂ backpressure monitor/switch.
  • Heater high temperature cut off (TCO).

OPTIONS

Non-electric heat exchange coils (for cooling).

PROCESS CONTROL MODULE

• Enclosure size: 5.5"W x 6.0"H x 19" deep.
• Faceplate: 6"W x 8.25"H.
• Controller enclosure designed to be either panel or shelf mounted.
• Temperature sensor: fluoropolymer sleeved J-type thermocouple.
• Available voltages: 110, 208, 240, 480 VAC, single phase.
• Three phase (custom wattages and voltages available upon request).

For more information, prices and availability please visit our contact page.