QMAXTM
Series, Quartz DI Water Heaters
Fast Response DI Heater.
All quartz & PVDF
replaces unreliable & inefficient
quartz bulb units.
BENEFITS
- Specific System Tuning (SST) for
high efficiency: 99.7%.
- Patent pending design eliminates
unreliable quartz bulbs.
- Reduced thermal mass for rapid
response.
- Small bolumetric hold up: 2.3L.
To read
about the ADVANTAGES OF USING HOT DI WATER, click here.
ENGINEERING SPECIFICATIONS
- Service: Continuous heating
of DI water.
- Operating Pressures:
- Max: Up to 70 psi (4.8 bar)
- Min: 5psi (.3 bar)
- Electrical: 1-25 kW per
column, 480 vac.
- Wetted Material: Ultrapure
semiconductor grade 214 quartz glass, PVDF (Kynar), and ChemrazÒ
O-ring.
- Cabinet Material: 304
stainless steel, 150 grit number four brush finish.
- Individual Column Housing:
304 stainless steel shell protects each quartz column.
- Column Replacement:
Individual column can be exchanged in the field. Columns are not field
serviceable.
- Compliance: Designed to be in
compliance with Semi S2 standards.
- Sensors: Liquid level,
over-temperature, pressure relief (set @ 70 psi).
- Control: PID based as
standard. Optimum control with optional software interface.
- Thermal Insulation: Pure
white silicon
- Holding Volume: 79 oz.
(2.3L).
- Residence Time @ 2 GPM: 15.5
seconds.
- Available Connection: 1/2 or
3/4-inch flared.
- Alarms: Low liquid level,
leak detector, high process temperature, and two over-temperature sensors.
- Placement: Floor mounted on
foot pads.
- Dimensions:
|
Height |
44"
(111.8 cm) |
|
Depth |
20"
(50.8 cm) |
|
Width |
36"
(91.4 cm) |
For more information, prices and availability please visit our contact
page.
* ChemrazÒ
is a registered trademark of Greene, Tweed and Company.
